

Eucalyptus Rustic Fences and Handrails Our fencing and handrails are manufactured from South African grown non-toxic CCA pressure treated Eucalyptus timber. They add an African theme to any project and are ideal for zoos, safari parks, theme parks or nature reserves wherever fencing, screening or walkways are required. |

| Description | 2000mm Width | 2200mm Width | ||||
| Height | 800 | 1200 | 1500 | 900 | 1800 | |
| Rustic Eucalyptus | ||||||
| Half Pole Scalloped | ||||||
| Uneven Lath Fence | ||||||
| Dropper | ||||||
| Machined Slab | ||||||
| Rustic Anti Climb | ||||||
| Rustic Diamond Trellis Handrail | ||||||
| Diamond Dropper Trellis Handrail | ||||||
Fence Dimensions & Specifications
| Rustic Eucalyptus Manufactured from 25-40mm Eucalyptus laths of varying height. Galvanised steel rods are put through each lath. A weather tolerant rope is then tied around the steel rods and the Eucalyptus laths. The fence can be shaped around any curve and is ideal as a temporary shelter, which can be removed after use and flattened again for easy storage. |
![]() Rustic Eucalyptus |
| Half Pole Scalloped Manufactured from 75-100mm Eucalyptus poles split in half, fixed onto horizontal slabbed Eucalyptus poles. It is available in varying heights and is used as a permanent fence. Very strong and long lasting. |
![]() Half Pole Scalloped |
| Uneven Lath Fence Manufactured from 25-40mm CCA treated, uneven length Eucalyptus laths, joined together by pushing 2 or 3 6mm galvanized steel rods through all the laths and after butting the laths tightly together, capping the steel rods ends. |
![]() Uneven Lath Fence |
| Dropper Manufactured from 25-40mm CCA treated, uneven length Eucalyptus laths, joined together by pushing 2 or 3 6mm galvanized steel rods through all the laths and after butting the laths tightly together, capping the steel rods ends. |
![]() Dropper |
| Machined Slab Fence Manufactured by fixing beveled pine planks (CCA treated) to horizontal, slabbed Eucalyptus poles. |
![]() Machined Slab Fence |
| Rustic Anti-Climb Manufactured by weaving 15-25mm Eucalyptus laths over and under 3 horizontal Eucalyptus laths (25-40mm) and then stapling the woven laths to the horizontal ones. |
![]() Rustic Anti-Climb |
| Rustic Diamond Trellis Manufactured with 25mm-40mm Eucalyptus laths, joined together at right angles to form a trellis effect |
![]() Rustic Diamond Trellis |
| Diamond Dropper Trellis Manufactured from 25 –40mm Eucalyptus laths, joined by 6mm bolts through pre-drilled holes to ensure “concertina effect”. Can be adjusted to different heights and widths. |
![]() Diamond Dropper Trellis |
| Specifications All Eucalyptus timbers are non-toxic C.C.A. treated. The timber has an exterior life of 10-20 Years |
|